Aerolite (Description and specifications of Aerolite)
Product Description
Think Pink Aerolite is a pink, high quality Glasswool thermal and acoustic insulation that is bonded with an inert, thermosetting resin. The strong, resilient, flexible blanket is supplied in compression packed rolls that are easy to cut and install.
Standards
Think Pink Aerolite is manufactured according to ISO 9001:2000 and is SABS tested and approved.
Features & Benefits
- Life long energy savings.
- Non combustible
- Lightweight and easy to handle.
- Inert - free of flame retardant chemicals.
- Exceptional tear strength.
- Safe application and use.
- No health hazards.
- Maintenance free.
- Does not absorb water.
- Long product life - product will not age.
Fire Properties
- Non combustible - Glasswool is tested to SABS 0177 Part 5.
- Class 1 fire index rating - tested to SABS 0177 Part 3.
- Completely fire safe - Euroclass A1 fire rating (BS EN 13501).
- All non combustible products are acceptable in any application - no deemed to satisfy tests are necessary (SANS 10400).
Thermal Properties
Contributes to indoor comfort and contributes to life long energy savings by reducing heat loss/gain due to its inherent thermal insulation properties.
Acoustic Properties
Offers exceptional acoustic properties and enhances indoor environmental quality by absorption of noise. Aerolite ceiling insulation reduces the sound transmission to and from a room.
Applications
- New homes / buildings.
- Retrofit in existing homes / buildings.
- Top up insulation for pending legislation (energy efficiency).
- Commercial buildings.
- Schools / hospitals.
Durability
- Odourless, inert & fully compatible for all standard building materials and components.
- Will not accelerate corrosion with steel, copper or aluminum.
- Will not sustain vermin.
- Will not breed or promote fungi.
- Non–hygroscopic.
Ecological Information
Isover insulation products are made from glass mineral wool, one of the most environmentally friendly insulants available.
Sustainable
Isover insulation products are made from pure silica sand, the earth’s most abundantly occurring mineral and a sustainable, infinite source.
Recyclable
Approximately 50% of the raw material used in the production of Isover products is recycled.
The recycled material can be post-consumer glass (from housing) or waste glass for flat glass manufacture, which would otherwise go to landfill.
Environmental
The manufacturing process doesn’t use or contain CFS's or any other damaging gases. In addition the unique compression packaging means more insulation in a smaller space - the result is better vehicle utilization, reducing the environmental impact of transportation.
Physical Dimensions
| R-value | Thickness | Width (mm) | Length | k-value |
| 1.25 | 50 mm | 1200 | 10000 | 0.040 |
| 1.88 | 75 mm | 1200 | 8000 | 0.040 |
| 2.50 | 100 mm | 1200 | 8000 | 0.040 |
| 2.88 | 115 mm | 1200 | 7000 | 0.040 |
| Mini Roll | ||||
| 1.25 | 50 mm | 1200 | 4000 | 0.040 |
| Typical values | ||||
Packaging
The rolls are compression packed in individual packs using strong pink polythene packaging.
The rolls will recover fully within 24 hours to its original thickness
Tools needed for installation
- A wood saw.
- A tape measure.
- A balancing plank (to prevent ceiling damage).
Installation Instructions
- Measure the distance between the timber roof trusses.
- Cut the Aerolite while still in the bag to the correct width to snugly fit the space between the roof trusses.
- Roll out the Aerolite firmly between the roof trusses on top of the ceiling.
- It is advisable to lay the Aerolite underneath any wiring and to cut around any down lights to allow heat to escape.
- Wrap off cuts around pipes to prevent them freezing in winter.
Recommendation: to wrap geyser for further energy savings.
Warning: Be careful not to step on to the ceiling board as you may damage or fall through the ceiling.
Handling & Storage
Store in dry conditions & undercover.
Store flat.
Handle with care, especially on the edges and corners, which can be damaged if subject to sharp impact.
Do not apply excessive pressure, for example by standing or sitting on the product, as permanent damage may be caused.
Specification
Think Pink Aerolite ceiling insulation (50/75/100 mm). The insulation should be laid on the ceiling over the rendering and between ceiling joists and/or tie in beams, fitted snuggly with ends butted firmly together. Think Pink Aerolite should not be secured in any manner.